Fluke 110 Multimeter

Fluke 110 Basic Multimeter

Fluke 110 Multimeter

Limited Supply Only Available While Supplies Last

Want to compare sizes? These little meters pack more
features than some DMMs twice their size. True-rms ac
voltage and current readings, for example. 6000 count
resolution. Min/Max/Average. And frequency and capacitance
capabilities. Plus they give you an easy-open battery access
door. They’re all CAT III rated for 600V and are protected by
a three-year warranty. The 112 model has a backlight and
delivers 0.7% basic dc accuracy. The price? They’re less than
you think. Yes, smaller is better. Definitely.

FEATURES:

True-rms ac voltage and current (Model 111 and 112)
for accurate readings on all waveforms
6000 count display provides improved resolution
Min/Max/Average recording
Frequency, capacitance & resistance capabilities
112 has a backlight to illuminate the screen in dark workspaces
Easy access battery door to change the battery without
breaking the calibration seal
Drop protected to 1 meter, 3 Year Warranty
Holster with probe holders for better test lead management
Compatible with ToolPak™ magnetic hanging kit
Compact & lightweight for use on the go
IEC CAT III 600V Safety Rating

Fluke 110 Series DMM Features

110 111 112

Basic DC accuracy of 0.7% • • •

6000 count display • • •

Manual reading hold for user convenience • • •

IEC 1010 rating: CAT III 600V • • •

Compatible with Fluke ToolPak meter hanging kit • • •

Backlight for measurements in low visibility areas •

Battery access without breaking the calibration seal • • •

General Specifications

AC Amps^*
Range: 3.00A to 10.00A
Accuracy: +/- (1.5% of reading plus 3 Cts)
Not specified below 3A
Crest Factor: <= 3
AC Response: 50 Hz to 500 Hz

DC Amps^*
Range: 0.001A to 10.00A
(20A overload for 30 seconds)
Accuracy: +/-(1.0% of Rdg plus 3 counts)

AC Volts
Range: 300 mV to 600.0V rms
Accuracy: +/-(1.0% of Rdg plus 3 counts)
AC Response: 50 Hz to 500 Hz

DC Volts Range: 1 mV to 600.0V
Accuracy: +/-(0.7% of reading plus 2 Cts)

Ohms
Range: 0.1 Ohm to 40.00 M-Ohms
Accuracy: +/-(0.9% of Rdg plus 1 Cts)

Capacitance Range: 1 nF to 9999 uF
Accuracy: +/-(1.9% of Rdg plus 2 Cts)

Continuity Beeper guaranteed on <20 Ohms
guaranteed off > 250 Ohms; detects opens
or shorts of 250 us or longer

Frequency
Range: Voltage Input - 5 Hz to 50 kHz
Current Input - 50 Hz to 5 kHz
(111 and 112 only)
Accuracy: +/-(0.1% of Rdg plus 2 counts)

Note The 110 Series is not recommended for use
with AC current clamps.
^*Not applicable for the 110

Item has been discontinued by Fluke, Call for Replacement Recommendations
Buy Product Online | Visit Store Home

Manufactured by FLUKE

  Related Products

  Hard Instrument Carry Case - Hard Instrument Carry Case with Pluck Foam to fit your instruments. 100's of sizes & styles available. Call for Details
  Fluke TL220 SureGrip Industrial Test Lead Set - Fluke TL220 SureGrip Industrial Test Lead Set
  Fluke TPAK Meter Hanging Kit (ToolPak) - Fluke TPAK Meter Hanging Kit (ToolPak)
  Fluke AC220 SureGrip Alligator Clips - Fluke AC220 SureGrip Alligator Clips
  Fluke PV350 Pressure & Vacuum Module - The Fluke PV350 Allows any Multimeter to Read Vacuum and Pressure
  Fluke 80T-150U Universal Temperature Probe - Fluke 80T-150U Universal Temperature Probe
  Fluke C50 Soft Carry Case - Fluke C50 Soft Carry Case

Other Items from Hand Held

  GMC Instruments MetraHIT 30M TRMS 6.5 Digit Multimeter - GMC Instruments MetraHIT 30M Precision Multimeter, Milliohmmeter, Thermometer, Data Logger with 6.5 Digit Display
  GMC Instruments MetraHIT 28C Calibrator, Multimeter, Milli-Ohm Meter - GMC Instruments MetraHIT 28C Calibrator, Multimeter, Milli-Ohm Meter
  Fluke 110 Multimeter - Fluke 110 Basic Multimeter
  Fluke 87-5 Multimeter with Temperature - Fluke 87-V - Fluke 87-5 Multimeter True RMS with Temperature
  Fluke H80M Holster & Magnetic Hanging System - Fluke H80M Protective Holster & Magnetic Hanging Strap for all 80 Series Fluke Multimeters
  Fluke 334 Clamp Meter - Fluke 334 Clamp Meter has a large display with backlight, measures ac amps, ac/dc volts, ohms and motor start-up current.
  Fluke 335 True RMS Clamp Meter - Fluke 335 True RMS Clamp Meter has a large backlit display, measures ac amps, ac/dc volts, ohms and motor start-up current.
  Fluke 336 True RMS Clamp Meter - Fluke 336 True RMS Clamp Meter that measures ac/dc current and voltage, ohms, motor start-up current with large display and backlight.
  Fluke 85-III True Multimeter - Fluke 85-III Digital Multimeter
  Fluke 177 Series Multimeter - Fluke 177 Series Multimeter
  Fluke 175 Series Multimeter - Fluke 175 Series Multimeter

Return To CalibratorDepot.com - Calibrator Depot sells calibrators calibration service NIST traceable calibrations metrology instruments


E-commerce powered by MonsterCommerce shopping cart.