718 30G	718 100G	Function	Range	Resolution	Accuracy	Notes
X		Measure Pressure* (internal sensor) Over Pressure 3xFS	-12 to 30 psi (-83 to 207 kPa)	0.001 psi (0.01 kPa)	0.05% full scale	Gasses/liquids (use the 718 with non- corrosive gases only) Zero, Min, Max, Hold, Damp
	X	Measure Pressure* (internal sensor) Over Pressure 2xFS	-12 to 100 psi (-83 to 690 kPa)	0.001 psi (0.01 kPa)	0.05% full scale	Gases/Liquids (non-corrosive) Zero, Min, Max, Hold, Damp
X	X	Measure Pressure* (with Pressure Modules) Over pressure per pressure module specs	28 Pressure Modules, 1.0 in. Water/ 0.25 kPa to 10,000 psi/ 69 MPa	To 0.0001 psi, per Pressure Module specs	To 0.05% of full span, per Pressure Module Specs	Media Compatibility per Pressure Module Specs Zero, Min, Max, Hold, Damp
X	X	Source Pressure, Built-in pump	-11 psig to full scale	N/A	N/A	Use the 718 with non- corrosive gases only
X	X	Measure mA	0 to 24 mA	0.001 mA	0.025% + 1 count
X	X	Loop Supply	24 VDC	N/A	± 10%	Drive;20 mA into 1000W for battery >6.8V; 700W for battery 5.8 to 6.8V

Maximum voltage:	30 volts
Non-operating temperature:	-40C to 60C
Operating voltage:	-10C to 55C
Relative humidity:	95% (10C to 30C) 75% (30C to 40C) 45% (40C to 50C) 35% (50C to 55C)
Operating altitude:	3,000m max
Shock:	1m drop test
Vibration:	Random, 2g, 5-500 Hz
Safety:	CSA C22.2 No. 1010.1:1992
EMC:	EN50082-1:1992 and EN55022:1994 Class B
Size/weight (718):	210 mm L x 83mm W x 62 mmD (8.25 in L x 3.27 in W x 2.44 in) 737g (26 oz)
Size/weight, (718 with holster):	216 mm L 94 mm W x 66 mm D (8.50 L x 3.72 in W x 2.60 in D) 992g (35oz)
Power:	9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline: two batteries in 718
Battery Life:	4 to 20 hours, typical, depending on Functions used
Warranty:	Three years (one year on pressure pump In Fluke 718)

*Supported Pressure Units; psi, in. water(4 C), in. water(20 C), cm water(4 C), cm, water(20 C), bar, mbar, kPa, inHg mmHg, kg/cm2