|
Martel DPC Pressure Calibrator (Pneucal Alternative)
MARTEL DPC Pressure Calibrator (Equivalent to Pneucal )
Replace That Old Wally Box with a Modern Alternative...
Martel Electronic's DPC is a highly accurate, digital calibrator for pneumatic field instrumentation, including valve actuators; P/I transmitters; controllers, gauges, switches, and recorders. It is especially suitable for checking 3 to 15 PSI systems. Its dual precision regulators enable output of set and variable pressures to control devices, while the switching mainfold allows fast selection among the pressure parts. The unit simultaneously displays pressure and either mA or VDC, and has a built-in loop power supply. Accuracy is +/-0.05% of full scale for all ranges.
Features:
Works with Compressed Plant Air 0.001 PSI Resolution, +/-0.05% Accuracy Dual Digital Display:PSI & mA/V Gauge, Differential, and Vacuum Modes Selectable Engineering Units Rugged Case to Withstand Factory Floor Environment Same Design Manifold as a Traditional "Wally Box"
Technical Specifications:
Range |
-5 to 30.000 PSIG/100.00 PSIG |
Engineering Units |
mm H2O, kPa, BAR, kg/cm2, mm Hg, in H2O, mA, cm H2O, Volts |
Media Compatibility |
Clean, Non-Corrosive Gases |
Modes of Operation |
Gauge, Differential, Vacuum (Vacuum to -5 PSI) |
Accuracy |
+/-0.05% F.S. +/-1 LSD for pressure an electrical |
Loop Power |
24 VDC |
Operating Range |
0 to 50°C |
Temp. Coefficient |
0.01% F.S./°'C for Temperatures Outside of 23°C +/- 5°C |
Storage Temp. |
-20 to 60°C |
Electrical Protection |
Fuse, 1/8 Amp |
Power |
Internal Ni-Cd Battery or AC Adapter that Simultaneously Changes the Battery and Powers the Unit. |
Display |
16 x 2 Line Dot Matrix |
Size/Weight |
13 x 12 x 6" HWD/12lbs. |
30 PSI Sensor |
Range |
Min |
Max |
Accuracy (+/-0.05% F.S.) |
PSI |
-5.000 |
30.000 |
0.016 |
mmHg |
-258.6 |
1551.3 |
0.9 |
Bar |
-0.3448 |
2.0685 |
0.0011 |
KPa |
-64.48 |
206.85 |
0.11 |
inH2O-4°C |
-138.4 |
831.9 |
0.5 |
cmH2O-4°C |
-351.5 |
2109.0 |
1.2 |
mmH2O-4°C |
-3515 |
21090 |
12 |
Kg/cm2 |
-0.3515 |
2.1090 |
0.0012 |
|
Price: $2,395.00
Buy Product Online | Visit Store Home
|
|
Manufactured by Martel Electronics (Beta) |
|
|
Other Items from Pressure Calibrators
Fluke 725 Ex Intrinsically Safe Process Calibrator - The Fluke 725Ex Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. It is the ideal tool for calibration work in Class I, Division 1 Groups B-D
Fluke 718Ex Intrinsically Safe Pressure Calibrator - Fluke 718Ex Intrinsically Safe Pressure Calibrator, Available in 30 & 100 PSIG Ranges
Fluke 717-30G 30 PSIG Pressure Calibrator - Fluke 717-30G Pressure Calibrator, 0-30 PSIG Range
Fluke 717-100G 100 PSIG Pressure Calibrator - Fluke 717-100G Pressure Calibrator, 0-100 PSIG Range
Ametek Jofra APC Advanced Pressure Calibrator - Ametek Jofra APC Advanced Pressure Calibrator Reads Vacuum to 10,000 PSIG
Ametek Jofra CPC Compact Pressure Calibrator - Ametek Jofra CPC Compact Pressure Calibrator Reads Vacuum to 200 PSIG
Ametek Jofra APM Advanced Pressure Module - Ametek Jofra APM S Series Advanced Pressure Modules for Vacuum to 10,000 PSIG
New!!! Fluke 726 Advanced Process Calibrator - The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process Industry with broad workload coverage, calibration power and unsurpassed accuracy in mind.
Beta BPPA100 Pressure Module Adapter - By using the Beta-Martel Model BPPA-100 BETA Port Pressure Adapter, beta pressure modules are fully compatible with the BETA 950, BETA 850, Martel MC-1200, Martel MC-1000, and Martel M2001.
Ametek Jofra ASC 300 Advanced Signal Calibrator - Ametek Jofra ASC 300 Signal Calibrator for Process Signal and Pressure Calibrations
Beta CalTOOL 32 Pressure Calibrator - Beta CalTOOL 32 Pressure Calibrator, Ranges to 3000 PSIG, +/-0.05% FS Accuracy
|
Return To CalibratorDepot.com - Calibrator Depot sells calibrators calibration service NIST traceable calibrations metrology instruments
|
|
|