|
Millennium Series 3001 Precision Calibrator
Millennium Series 3001 Precision CalibratorThe Martel 3001 precision calibrator combines the power and features of the M2001 (voltage, current, TC, RTD and pressure) with a second completely isolated measurement channel for a single laboratory calibration instrument unmatched in versatility, performance, and value. As with every Martel calibrator, the 3001’s world-class performance and features are accessed through a very simple-to-use, intuitive user interface. The Martel 3001 is truly a “process calibration laboratory in a box.”
Features
- Superior calibration accuracy to 0.0025% of reading
Direct keyboard entry or cursor entry with decade control
Source/Read thermocouple (13), RTD (9), Voltage, Current, Pressure (read only)
Custom RTD and SPRT profiles
Nine (9) setpoints for each output range and type
Beryllium-Copper binding posts reduce thermal EMFs
RS232, USB and IEEE-488 remote control
Compatible with Fluke Met/Cal® software
Isolated measurement channel
- Two (2) voltage ranges: 10V and 100 V DC
- MilliAmp range 0 to 52 mA
- MilliAmp range with simultaneous 24 VDC power
- Selectable 250 Ohm HART™ resistor
- Accuracy of 0.005% of reading on voltage ranges
Simple, Intuitive Interface
The 3001 provides simple, front-panel entry of mode, range, and value, using either direct key-board entry or cursor entry. Using cursor entry , the LEFT/RIGHT arrow keys are used to move the cursor under the digit in the display to be changed. The UP/DOWN arrow keys increment/decrement the value at the cursor position. Using direct keyboard entry, the exact value desired is entered using the numeric keys, and the ENTER key is pressed to set the output to that value. Whichever way you choose, setup is simple and fast. In the voltage output mode, the 3001 auto-ranges on the entered value for maximum accuracy at all times.
The Performance You Demand – In Any Mode
Voltage Mode
The 3001 offers four precision voltage output ranges (100mV, 1V, 10V, and 100V) all with 0.003% (30ppm) accuracy. These ranges are ideal for calibrating a broad range of DC voltage instrumentation. Additionally all voltage outputs settle to full specification in less than 200ms making the 3001 ideal for automated calibration systems.
An automatic stand-by mode assures that output voltages above 30VDC must be acknowledged by the operator before the voltage appears at the output jacks. The stand-by mode is also triggered if the output current compliance is exceeded, thereby protecting the device under calibration.
Current Mode
The 3001 features a precision current output range (100mA) that offers 0.01% (100ppm) accuracy, which is ideal for calibrating process instrumentation especially 4 to 20mA equipment. With a full 12 volts of compliance at 100mA virtually any precision DC current measuring device can be calibrated using the 3001. Like the voltage ranges the current range offers quick settling time and an operate/stand-by mode.
Thermocouple Mode
The Martel 3001 can read and source any of 11 types of thermocouples. Its T/C input and output is Cold Junction Compensated, using an ultra-stable PT-1000 sensor.
RTD Mode
The 3001 can read and source 9 RTD types as well as YSI-400 and Ohms for non-standard curves. Probe coefficients (A, B, C, and R0) can be entered directly, with storage for up to five custom curves and one SPRT curve. The performance of the 3001 in the RTD mode compares to dedicated RTD measurement instruments. Unlike low-cost, less accurate RTD instruments, the display in the 3001 is always active, reading to three decimal places, using polynomial averaging to extract a high accuracy signal. The result is a very quiet, high accuracy reading.
Pressure Mode
The 3001 operates with all Martel BetaPort series pressure modules using the BPPA module adapter and covers pressure ranges from 0 to 10" H2O to 10,000 psi. Pressure can be displayed in a wide range of engineering units with up to 0.025%
Full Scale accuracy. The 3001 also supports Fluke 700 series modules and Mensor 6100 precision pressure modules.
Total Setpoint Control
A SHIFT key provides easy access to the setpoint controls of the 3001. Up to nine setpoints can be defined for each output mode and each thermocouple and RTD type. Setpoints are recalled individually at the touch of three buttons, SHIFT, SETPOINT button and then the corresponding numeric keys 1-9. Any number of sequential setpoints can be stepped through automatically, with complete control of dwell time. Either way, for rapid setup of repeatable tests, no other instrument comes close to the Martel 3001.
Remote Control
All of the 3001 operating functions can be accessed via RS-232, IEEE-488 or USB using a standard PC running Fluke Met/Cal® software, Windows® HyperTerminal or other software using an ASCII protocol. Custom control programs may be written using programming software such as C++. Switching between LOCAL and REMOTE is as simple as touching the SHIFT and LOCAL buttons.
Rock-Solid Stability
The 3001 stability and accuracy is traceable to NIST standards. The accuracy of the 3001 is specified for both 90-day and one-year intervals. Manual zero calibrations can be made on all T/C and pressure functions to eliminate offsets.
Flexible Output
Five-way copper alloy binding posts provide a wide range of connection options. A standard pressure module connector is provided, as is the CJC T/C mini-jack.
Isolated Measurement Channel
The 3001 features a fully isolated measurement channel which allows the user to calibrate process transmitters and signal isolators. In reality it’s like having two instruments in one! This channel also incorporates a 24 volt loop power supply to power 2-wire transmitters and a HART interface resistor enabling direct connection to H ART communicators. Key features are: Two voltage ranges 10V and 100V DC, Milliamp range 0 to 52mA, Milliamp range with simultaneous 24 volt power (0 to 24ma), Selectable 250 ohm HART resistor Accuracy of 0.005% of reading on all ranges
|
Price: $4,295.00
Buy Product Online | Visit Store Home
|
|
|
Manufactured by Martel Electronics (Beta) |
|
|
|
Related Products
Beta BPPA100 Pressure Module Adapter - By using the Beta-Martel Model BPPA-100 BETA Port Pressure Adapter, beta pressure modules are fully compatible with the BETA 950, BETA 850, Martel MC-1200, Martel MC-1000, and Martel M2001.
Beta Port-P Pressure Module - Beta Port-P Pressure Module
|
|
Other Items from Multifunction Calibrators
Extech CMM-15 Process Calibrator Multimeter - Extech CMM-15 Process Calibrator Multimeter
New!!! Fluke 726 Advanced Process Calibrator - The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process Industry with broad workload coverage, calibration power and unsurpassed accuracy in mind.
Ametek Jofra ASC 300 Advanced Signal Calibrator - Ametek Jofra ASC 300 Signal Calibrator for Process Signal and Pressure Calibrations
Fluke 725 Ex Intrinsically Safe Process Calibrator - The Fluke 725Ex Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. It is the ideal tool for calibration work in Class I, Division 1 Groups B-D
Fluke 724 Multifunction Temperature Calibrator - Fluke 724 Multifunction Temperature Calibrator
Beta MasterCal 990 Precision Multi-Function Documenting Calibrator - Beta MasterCal 990 Precision multi-function documenting Calibrator with Hart Device and Pressure Calibration Capability
Martel M2001 Benchtop Multifunction Calibrator - Martel M2001 Benchtop Multifunction Calibrator
Martel MC-1000 Multifunction Process Calibrator - Martel MC-1000 Multifunction Process Calibrator sources all common plant signals and features optional pressure calibration capability
Millennium Series 3001 Precision Calibrator - Lab standard multifunction calibrator with isolated measurement channel
Druck MCX II Documenting Calibrator - Druck MCX II Documenting Process Calibrator
Druck TRX-II Documenting Process Calibrator - Druck TRX-II Documenting Process Calibrator
|
|
Return To CalibratorDepot.com - Calibrator Depot sells calibrators calibration service NIST traceable calibrations metrology instruments
|
|
|
|
