| | |
|
| |
| | |
|
|
Hart Scientific 7102 Cold Liquid Micro Bath Temperature Calibrator (-5 to 125°C)
|
Item Number: 7102-156
Manufacturer: Hart Scientific
Manufacturer Part No: 7102-156
* Whole number only
|
|
Hart Scientific Model 7102 Micro Temperature Calibration Bath
|
Micro-Baths Models 6102 7102 and 7103
|
|
World's smallest portable calibration baths
|
|
Calibrates sensors of any size or shape
|
|
Stability to +/-0.015°C
|
|
Ranges from -30°C to 200°C
|
|
Specifications
|
6102
|
7102
|
7103
|
|
Range
|
35°C to 200°C
(95°F to 392°F)
|
-5°C to 125°C
(23°F to 257°F)
|
-30°C to 125°C
(-22°F to 257°F)
|
|
Accuracy
|
+/-0.25°C
|
|
Stability
|
+/-0.02°C at 100°C
+/-0.03°C at 200°C
|
+/-0.015°C at
-5°C
+/-0.03°C at 121°C
|
+/-0.03°C at
-25°C
+/-0.05°C at
125°C
|
|
Uniformity
|
+/-0.02°C
|
|
Resolution
|
0.01°C/F
|
|
Operating Temperature
|
5°C to 45°C
|
|
Heating Time
|
25°C to 200°C:
40 minutes
|
25°C to 100°C:
30 minutes
|
25°C to 100°C:
35 minutes
|
|
Cooling Time
|
200°C to 100°C:
35 minutes
|
25°C to 0°C:
30 minutes
|
25°C to -20°C:
45 minutes
|
|
Well Size
|
1.9” dia. x 5.5” deep (48 x 139 mm)
|
|
Size
|
5.5" W x 10.38" H x 8" D
(14 x 26 x 20 cm)
|
7.2" W x 12" H x 9.5" D
(18 x 31 x 24 cm)
|
9" W x 13.2" H x 10.5" D
(23 x 34 x 26 cm)
|
|
Weight
|
10 lb. (4.5 kg) with fluid
|
15 lb. (6.8 kg) with fluid
|
22 lb. (9.8 kg) with fluid
|
|
Power
|
115 VAC, 270 W
|
115 VAC, 200 W
|
94-234 VAC, 400 W
|
|
NIST-Traceable Calibration
|
Data at 50°C,
100°C, 150°C, 200°C
|
Data at -5°C, 25°C,
55°, 90°C, 121°C
|
Data at -25°C, 0°C, 25°C, 50°C, 75°C, 100°C, 125°C
|
Hart Scientific, the leader in product innovation and development,
is introducing new instruments that will change the way you work.
Hart's Micro-Baths are the world's first completely portable baths
built specifically for temperature calibration work. And now we've
added a third model, the 7103, for calibrations at temperatures as low
as -30°C.
Micro-Baths can be used anywhere for any type of sensor. The
Model 6102 weighs less than 10 pounds, with the fluid. It's lighter
and smaller than most dry-wells, has a spill-proof lid, and is easier to
carry than your lunch. You can take it where you need to go without
carts or excessive effort. Micro-Baths can even be transported with the
fluid in them.
Wherever you go with your Micro-Bath, you can count on its
performance. Each model is stable to +/-0.03°C or better, depending
on the fluid you use. Uniformity is +/-0.02°C or better for low uncertainties
using a reference thermometer. Display accuracy has been improved to
+/-0.25°C for quick calibrations without a reference thermometer. In short,
you get the stability and precision of a liquid bath in a dry-well-sized package.
Don't be fooled by competitors who place a can of oil inside a dry-well
and call it a bath. Hart Micro-Baths are maximized for true fluid-bath
performance.
With a 1.9-inch-diameter, 5.5-inch-deep tank, a Micro-Bath can calibrate
any type of sensor including short, square, or odd-shaped sensors. The
problems of fit and immersion are virtually eliminated by using a fluid
medium rather than a dry-block calibrator. Micro-Baths are perfect for
liquid-in-glass and bimetal thermometers.
The 6102 has a temperature range from 35°C to 200°C, the 7102
covers -5°C to 125°C, and the 7103 extends from -30°C to 125°C.
Stability, uniformity, and accuracy specifications cover the entire range
for each bath, not just the best temperature.
All Micro-Baths have RS-232 ports, come with our Interface-it software,
and can be used with Hart's MET/TEMP II software. Also included are
contacts to calibrate a thermal switch, eight set-point memory storage,
ramp-rate adjust, and over-temperature safety cutout.
You may have noticed we haven't touted our CFC-free refrigeration.
Yes, cold Micro-Baths are CFC-free, and also compressor-free. That's
right - no heavy, noisy compressor to lug around. We achieve our
temperature range and stability with only one moving part. This means
more durability and less weight. |
|
|