Fluke 700PTP Pneumatic Test Pump (Vacuum to 600 PSIG)

     The Fluke 700PTP features an integral pressure adjustment vernier which varies
the pressurized volume by 2.0 cc over approximately eleven turns of the vernier knob.
The pressure variation achievable with the vernier will depend on the nominal pressure
and total pressurized volume, but with a minimum volume and maximum pressure, the
vernier provides a broad adjustment range. With a minimum volume and no pressure
applied, the vernier can also be used to provide a 0 to 70" H₂O range. Larger volumes will
provide a smaller range of adjustment, but greater resolution. The length of the stroke
can be adjusted to limit the maximum output pressure. Maximum output pressure is
adjustable from to 600 psi.

Includes:

• Adapter to connect the reference gauge port on the pump body to the 1/4 NPT male fitting
  on Fluke 700Pxx Pressure Modules (except 700P29, P30, and P31)
• One-meter nylon hose to attach to unit under test port to the unit under test.
  The hose terminates in a 1/4-BSP (ISO228) female parallel thread fitting
• Adapter to convert the 1/4-BSP female parallel thread fitting to a 1/4 NPT female
• Replacement seal kit
• Instruction sheet